Shutdown Oil System (SOS)

An Effective way to Improve Shutdown Operations of your Extruder

A common issue facing extrusion cooking operations is how to effectively shut down the equipment without contaminaing the surrounding area with water discharge.

The answer is Wenger's Shutdown Oil System (SOS). This clever approach was designed for extrusion cooking processes by using oil or fat - instead of water - to aid in the shutdown process.

Oil is heated and stored in a vessel near the extruder.  During shutdown, oil is injected into the extruder barrel at a user-determined rate.  The oil mixes with the material in the barrel to create a semi-moist materal that will not drain out from the die or back pressure valve, but also will remain pliable. Even if the extruder is off-line for a long time period, the oil-laden material will not harden completely thus making start-up much easier (no more scraping and removing of dried product on the screws). 

Benefits of the SOS solution:

• Product changeovers are quicker and more efficient
• Eliminates free water discharge
• Oil-laden material is easier to recycle or dispose
• Keeps material in extruder soft for much easier start-up processes
• Significantly reduces the time required to clean dies
• Reduces incidents of plugged floor drains
• Reduces strain on facility treatment systems or sanitary sewers.

Two Models Available:

• 30 gallon / 115 liter
• 90 gallon / 340 liter